Select laser engraving machine

Published：2009/10/21　Click：7470　Font size：Small Medium Larger [back]

How to choose laser engraving machine according to I can see, laser engraving machine in the purchase, efforts should be the following considerations:
        First: to buy the former first determine its purpose. If the order processing handicraft. Offset printing requirements such as high precision, it would take a clear belt pulley diameter should be small as well; if the garment industry, require high-speed, you need to understand in order to pulley large diameter for the better. The reason for that choice is due to the limited scope of stepping speed electric shock can not be a full range of needs.
        Second: Consider engraving machine output intensity and that the power should be on demand. Usually bigger power, the laser tube output reaction is slow, the depth of the scan occur when different, in cutting the output response was not obvious;
        3rd: Understanding its structure. The structure of two laser engraving machine. First, aluminum steel rails, durable, and reliable; first aluminum alloy rails, life is short, price level.
        Fourth: to understand its main edition. The main version of the part should not be too subtle, or susceptible to electrostatic shock to wear, resulting in damage to the main version. The best choice for general-purpose components on the Main Board, even if there is damage can also be easily fixed.
        Fifth: to understand their supplies. Laser engraving machine laser control is one of its major consumables. The quality of laser tube is related to the cost of its use. If the good quality and can be used a year or so, if the poor quality can only be used 3. four months. Basically, the election of good quality and more cost-parity level! annual cost of about 3,000 yuan, including the replacement of consumables and maintenance costs.
        Sixth: The matching software to use the software suitable general-purpose engraving machines.
        Seventh: test machine, the rack less vibration, speed adjustment significantly. Particular attention to low-speed cutting is smooth. These are the lines I do this a little more than six years of the voice of experience. Zhijiao Welcome!